Automatic shutdown of the computer is an extremely useful option that will help you out more than once. It comes in handy in cases where your PC or laptop is busy with a long process and you need to leave. In this case, you can configure the computer to turn off - when the desired operation is completed, it will turn off on its own. And you can calmly go to bed, go to work or do your other things.
Most often, configuration is required if you:
- check your PC for viruses;
- convert video files;
- install a computer game;
- download large files;
- copy important data, etc.
There are many options here, but the point should be clear.
The first is using built-in Windows tools. The second is using additional software. Read about the last method here:. And this article describes all the possible ways to configure the computer to turn off at a given time using built-in Windows tools.
All the methods below are universal and work on Windows 7, 8 and 10. Therefore, no matter what operating system you have, you can schedule your computer to shut down in any convenient way.
The first method on how you can enable automatic shutdown of a computer or laptop is to use the “Run” section. For this:
The following window will appear confirming that everything was done correctly.
The number 3600 is the number of seconds. It can be anything. This particular command activates the automatic shutdown of the PC after 1 hour. The procedure is one-time only. If you need to turn it off again, you must do it again.
Instead of the number 3600, you can write any other number:
- 600 – shutdown after 10 minutes;
- 1800 – after 30 minutes;
- 5400 – in an hour and a half.
I think the principle is clear and you can calculate the required value yourself.
If you have already activated the computer to shut down and for some reason changed your mind, then call this window again and write the line shutdown -a . As a result, the scheduled automatic shutdown will be cancelled. If everything is done correctly, the following message will appear.
Shutting down the computer via the command line
Another very similar method is through the command line. To enable this option:
If you suddenly change your mind about performing this operation, then open this window again and enter – shutdown -a.
This command only works when you have already set the time to turn off the computer, but it has not yet arrived.
By the way, if this procedure needs to be performed regularly, then there is an easier way. To avoid opening the Run window or Command Prompt, create a shortcut (for example, on your desktop). And in the “Object Location” field write the following line C:\Windows\System32\shutdown.exe -s -t 5400(the number can be any). Click Next, then enter a name for the shortcut and click Finish.
Now, when you need to set your computer to shut down, just click on this shortcut. And this option is immediately activated (you will see a confirmation message).
For convenience, you can create another shortcut to remove turning off the computer (in case you need it). But here you need to write down the following: C:\Windows\System32\shutdown.exe -a(no period at the end).
Turn off the computer according to schedule
And the last method is to turn off the computer by time using the “Scheduler”. Suitable if you need to perform this procedure regularly: daily, weekly, etc. In order not to constantly launch the command line, you just need to set the time to turn off your computer or laptop once and that’s it.
To do this:
This is how you can set the computer shutdown time. Daily or monthly settings are carried out in approximately the same way. Some fields will be different, but there is nothing complicated there - you'll figure it out.
What should I do if I need to edit or delete this task? In this case, go back to the “Scheduler” and open the “Library” tab. Find your task in the list here (by name) and double-click with the left button.
In the window that opens, go to the “Triggers” section and click on the “Edit” button.
If you no longer need to shut down your PC on a schedule, then go to the “Library”, select your task, right-click, and then click “Delete”.
A few words in conclusion
Many modern programs have a checkbox “Turn off the PC after finishing the procedure.” Most often, it is available in those utilities that take a long time to complete their work - for example, disk defragmentation, scanning a laptop or computer for viruses, etc.
Be sure to check that each program has this checkbox. If it is, then you will not need to configure the PC to turn off at a time. It's much easier and more convenient. If it is not there, then you will have to configure it manually.
By the way, how to correctly calculate the time when you need to turn off your PC? Usually programs show an approximate value when a specific procedure (virus scan or defragmentation) will be completed. Look at it and add another 20-30% (or more) on top. In any case, your PC will be turned off before you wake up in the morning or come home from work in the evening.
This article will discuss a topic that will be useful to most users of personal computers running the Windows operating system, namely how to set the Windows 10 shutdown timer without installing unnecessary software.
This option will be useful to you if you are sure that you will work at the computer for a certain period of time and then go away somewhere. Or, as trivial as it may sound, if you allowed your child to spend, say, 1 hour at the computer, and you are sure that in the end he will not listen to you, then the function that will be described below will help you in this situation. So let's get started:
Set the Windows 10 shutdown timer:
To turn on the timer, open a program called Run, to do this, type the name in the search bar and click on it accordingly in the list above
Well, for example, a simple mathematical calculation, we need the computer to be turned off after 1 hour, every hour is 60 minutes in each minute of 60 seconds, that is, by simple mathematical multiplication 60x60 we get the figure 3600 seconds.
The PC will be turned off in 3600 seconds, press the Enter key to confirm the request. The request should look like this: shutdown -s -t 3600
And we see the information: The computer will be completed in 60 minutes.
That’s it, our computer will be turned off during the period of time that we have set, would you agree that it’s convenient?
There is no need to install any additional shutdown programs for Windows 10!
But I would also like to tell you about a small nuance: we set the timer, but what if we suddenly changed our minds and wanted to continue working?
In this case, we need to enter the command line again; if you don’t want to run it through “search,” then use the hot keys: WIN + R, press this combination, and again we get to the Run parameter.
Just write a slightly different command like: shutdown –a and click Enter
After executing the command, we see a message from the system that Logout has been cancelled, accordingly we canceled the shutdown and the computer will no longer turn off. This is where I end the article, if you have any questions, write them in the comments, subscribe to the news, and do not allow children to use for a very long time computer!
mixprise.ru
How to set a computer shutdown timer in Windows 10
The article describes instructions on how to set a computer shutdown timer in the Windows 10 operating system. We will set the timer using a standard OS tool called shutdown.
Automatic shutdown of the computer is mainly used after technical operations, such as scanning for viruses, downloading third-party software, etc.
1st method. The simplest method and can be used in earlier versions of Windows. Press the Win + R hotkeys and enter the following command in the “Run” window
shutdown -s -t 60
where 60 is the seconds after which the computer will automatically turn off. The user can set any value.
After clicking the “OK” button, the system will notify you that the session will end after the scheduled time.
To cancel a scheduled shutdown, you need to enter the command shutdown /a
2nd method. In order to use this method, you will need to use the Windows Task Scheduler. To call it, press the Win+R keys and enter the command taskschd.msc in the “Run” window, or enter the name itself in the standard search engine of the system.
In the right part of the window, select “Create a simple task”, specify any name for it and click “Next”.
In the next paragraph, select “One time”, then set the date and time. For the “Action” item, leave “Run a program” as it is, then in the “Program or script” field enter the shutdown command, and in the “Arguments” field - -s.
After completing this task, the computer will turn off automatically at the scheduled time.
barbadosmaney.ru
How to set a timer to turn off a Windows 10 computer using standard means?
Automatically shutting down the computer after a certain period of time is a feature of the Windows operating system that is not obvious to users. Moreover, it is implemented in software from Microsoft, but not everyone knows about it. You can also set a timer to turn off your computer in Windows 10 or earlier versions of operating systems using third-party programs that have a more user-friendly interface, but they must be downloaded separately. We suggest looking at a way to set a scheduled shutdown of your computer after a certain period of time using the command line.
How to set a timer to shut down your Windows 10 computer using the command line?
Attention: The method of automatically turning off the computer after a certain amount of time, described below, works not only on the Windows 10 operating system, but also in earlier versions - Windows 8, Windows 7, Windows XP.
Microsoft, when developing the Windows operating system, assumed that users may need to turn off their computer after a few hours or minutes. At the same time, even an experienced Windows user does not always know that the operating system has a built-in timer to turn off the computer. This is due to the fact that it does not have a graphical interface, shortcuts, and can only be accessed through the command line. To set a computer shutdown timer using standard Windows tools:
The Windows command line also supports a number of other commands related to the shutdown function. We suggest you familiarize yourself with them, since a combination of commands allows you to achieve the desired results in automating the process of turning off your computer at a certain time or after a specified period.
Windows Command Line Options
When using the shutdown command to shut down the computer, you should be aware of the parameters entered after it, which are specified by letter keys. The key can be written after the dash symbol (examples: -a, -p, -h) or slash (examples: /a, /p, /h). It is important to remember that all letters entered into the command line along with the shutdown function must be written in Latin characters (that is, in English).
Windows command line options for the shutdown command:
- /a – cancels the scheduled automatic shutdown of the computer.
- /s – shutdown the computer.
- /r – shuts down the computer and automatically reboots it.
- /t – definition in seconds of time after which the previous command in the line will be executed. This parameter is specified in seconds and the allowed maximum value is 315,360,000 (10 years). If this option is not used, the computer considers the automatically set delay time before performing an operation to be 30 seconds.
- /f – forcefully closes all programs and tasks. This option should only be used if you have specified a time after which the computer will shut down.
- /l – ends the current Windows session.
- /i – visualization of the interface for automatically shutting down the computer. Attention: On the command line, the –i parameter must be written immediately after the main function (shutdown)
Please note: you can read for yourself the full list of parameters that are expected to be used with the shutdown command. To do this, just enter the following combination of functions “shutdown /?” on the MS DOS command line. To do this, launch the standard Windows command line (Windows + R key combination), enter the cmd.exe command in it, and then in the MS DOS command line window that opens, write “shutdown /?”. 
How to create a convenient timer to shut down your computer on Windows 10 after a certain time?
If you regularly have to use the function of turning off the computer after an hour, two, or any other period of time, then the process of starting the countdown timer until shutdown can be automated as much as possible. Instead of regularly remembering the values of functions for the command line, you can write them down once in a separate shortcut, by double-clicking on which the computer will begin counting down to the shutdown time.
Creating a computer shutdown timer shortcut on Windows 10 is simple:
By double-clicking with the left mouse button on the created shortcut, you can easily run the command that is written in it. Thus, you can automate the process of setting a timer to turn off the computer after a certain time - 10 minutes, an hour, 5 hours or more. These shortcuts are often created by system administrators for employees who need to leave their computers turned on at the end of their shift to process certain tasks.
OkeyGeek.ru
Windows 10 computer shutdown timer: automatic and operational ways to turn off your PC
Sometimes a person can fall asleep in the evening right in front of a PC or laptop screen while watching a movie or listening to music. The Windows operating system is designed for long-term operation, but during sleep it must be turned off. If you're not sure you can do it at the right time, use software. Many people find it more convenient to install a circuit breaker.
Turning off the computer using a timer using Windows
The latest version of Windows comes with built-in tools that will help the user set a specific time to turn off the PC. Some of them are a little more difficult to set up, others are much simpler. The Windows 10 computer shutdown timer can be set using the following means:
- through the "Run" function.
- command line;
- task scheduler.
This is an easy way to shut down your PC by a certain time. To do this, use the internal Run utility. The call and setup goes like this:
- Press the win button combination (Windows key) + R.
- A window will appear where you need to enter the command “shutdown -s –tN. N” (without quotes).
Instead of the last letter N, enter the time after which you want the circuit breaker to trip in seconds. After pressing the enter button, a large message will appear on the screen with the time remaining until this command is executed and the operating system session ends. To calculate the time in minutes (in seconds, not everyone understands how much is left until the end of the session), you need to divide the entered number by 60.
How to turn off your computer using a timer using the command line
Another similar method for setting the shutdown timer for a Windows 10 computer is the command line. To do this, you first need to get there, then set the required time. This is done as follows:
- Right-click on the “Start” button, and in the drop-down menu click on “Command Prompt” (administrator). You can also launch it with the combination “win + R”, enter “cmd” in the window and press enter.
- A window will appear resembling a DOS environment. Enter the command “shutdown /?” (all commands in the further description are entered without quotes).
- In order for the circuit breaker to operate after a specific period of time, you must write “shutdown /s /f /t 3600”, where the last number is the seconds until the shutdown.
- If you need the task to run at a certain time, then you need to write “at 22:00 shutdown /r /f”.
How to set a timer to turn off the computer in the task scheduler
To enable the Windows 10 computer shutdown timer, you can use the task scheduler. The required moment is set as follows:
- Press the "win+R" key combination.
- Enter taskschd.msc into the line. This will open the scheduler.
- In the right menu, find the line “Create a simple task”.
- Come up with a name, and then you can start creating a task to turn off Windows 10.
- Set the time and launch date for it, and click the “Action” button.
- There will be two fields in the “Run programs” line. For the first one – “Program”, enter “shutdown”, in the second – “Arguments”, write “-s”.
- Set the shutdown time for Windows.
If you wish, you can download and install third-party programs to shut down your computer. They have a more friendly interface and, as a rule, do not require the introduction of special commands. All you have to do is set specific indicators for the switch and run the utility. All of them are distributed free of charge, so you can choose any of the options.
How to set your computer on a timer in Last Task
The computer shutdown timer utility for Windows 10 Last Task is widely popular; the latest version can be downloaded from the website of the creators of this software. After turning on the application, an active window will appear in which:
- click “New task”;
- enter the required shutdown time;
- click "Assign".
Russified program Computer shutdown timer
Many utilities have an English interface, but this one is completely Russified. During installation, you will be asked to install additional software on your PC, but it is better to refuse this. After enabling the application:
- specify the time to shut down Windows 10;
- activate it.
How to set the computer shutdown timer in Wise Auto Shutdown
Another great option for setting the PC shutdown time is Wise Auto Shutdown. This utility is also completely Russified, so the interface is easy to navigate. Unlike the previous option, it does not require downloading any additional software. Setting up the application is very simple:
- indicate what the utility needs to do: shut down, reboot, etc.
- set the time when or after what period to perform the action;
- activate the created action.
How to set up a computer timer in GOM Player
You can use applications that were originally intended for other purposes as a switch for Windows 10. An example of such software is GOM Player, a media player that is often used to watch movies. People often fall asleep in the evenings when watching movies, so the developers took care of their users. The algorithm is as follows:
- Click on the Settings menu.
- Click on the item “Turn off when the playing file or playlist ends.”
- Even if you fall asleep, the PC will automatically shut down by the end of the movie.
How to set a computer shutdown timer in AIMP
Another version of the program, which is intended for listening to music and creating playlists, is AIMP. The developers have added to the application interface the ability to set the PC to shut down. This is done as follows:
- check the box next to “Enable sleep timer”;
- set the action to perform;
- set the time after or by which this should be done;
- Click "Apply".
Learn how to turn off your laptop using the keyboard.
Video: how to set a timer to turn off your computer
sovets.net
Windows 10 computer shutdown timer: enable it using OS tools or third-party programs
If you need to turn off your computer at a certain time when you won't have access to it, you can use a timer. Not everyone knows that Microsoft programmers equipped Windows 10 with a timer, but third-party programs can also be used to turn off the PC.
There are several ways to start the shutdown timer on your computer, depending on which option suits you best.
Windows tools
You can turn off the device using the standard options.
Using the Run window
This method is suitable for Windows 7, 8 and 10. For this, there is a special command that will turn off the PC after a certain time:
After the specified time, the computer will turn off as standard, closing and saving information in all programs. If you need to force an exit from the OS, add the following parameter to the command: -f.
Healthy! To cancel the command, enter: shutdown –a
Creating a shortcut or bat file
To avoid entering a command every time, create a shortcut or bat file that launches it.
Label
bat file
In command country
In the task scheduler
Special programs
You can turn off your computer at a certain time using special programs, not just Windows tools.
Last Task
The Last Task utility has a simple interface, making it easy to use. To start the timer, press:
Important! If necessary, you can cancel the timer setting in the program window.
A simple Russified program, which, however, during installation, offers to install additional software on the computer (but you can refuse this) and forcibly terminates all programs, without giving the user the opportunity to save the actions:
Wise Auto Shutdown
Russified Wise Auto Shutdown program, which does not contain additional software. The interface is intuitive:
Important! After setting the timer, a reminder will appear that will allow you to delay turning off the PC for a certain time.
GOM Player
In this case, the shutdown timer is built into the GOM Player media player:
AIMP
The button for controlling power and turning off the computer for the AIMP player is located in the program interface: 
Turning off the computer using a timer Windows 10 PC shutdown timer - users often have a question about how to set a timer to turn off a computer in Windows 10 or any other version of wiondows 7, 8.1 or XP.
How to set a shutdown timer for Windows 10 - 7
The procedure is quite simple and is suitable for all latest versions of the operating system (7,8,10). The following methods for setting the shutdown timer are often used:
- 1 - Shutdown Timer
- - each version of the OS contains a “shutdown” utility that allows you to set a time to shut down Windows. To launch it, you need to call the standard “Run” utility by pressing the Win + R hotkeys. In the command line, you must enter “ shutdown -s -t N"wherein "N" should be the time before shutdown. After clicking "OK" inWindows10 timer will show a full screen notification about the exact time the processor turned off, and forWindows7 and 8 will appear in the form of a dialog box at the bottom near the tray.
- To force shutdown at the appointed time, add "f» separated by a space after the time before shutdown. Thus, the data and its progress will not be saved.
- To disable the timer, enter “shutdown -a"
- 2 - Shutdown the operating system through the task scheduler
- - by calling the command line by pressing the Win + R keys, you must enter “ taskschd.msc"and click "OK". The task scheduler will open, where you should select “Create a simple task” and enter any task name and on the left in the “Trigger” section select “One time” or “One time”.
- Now you should select the “Action” section and click on “Run the program”. In the empty field you must enter the command "shutdown" and in the field below add the value "-s" After clicking on the “Next” button, the user must confirm his decision by clicking on the “OK” or “Finish” button. Timer on!
- 3 - Assigning shutdown times in special software (for experienced ones)
- - First of all, you need to download from the official resource and briefly familiarize yourself with the user agreement during installation. There are often cases in which the system is literally teeming with useless software (Yandex bar, mail.ru agent, Kometa, etc.).
Windows as an operating system retains its guests thanks to the highly respected branded uniformity of publications. Each version is developed in compliance with generally accepted rules of interface and style. For example, such a function as the Windows shutdown timer is transferred with each edition in the same form and with the same capabilities.
Paradoxically, this approach suits everyone. Users are accustomed to the old algorithm of actions and are ready to carry out various operations even with their eyes closed, while the developer, meanwhile, makes changes to the internal functionality of the OS.
Windows computer shutdown timer
Many modern gadgets and their platforms have a built-in function to turn off the device over time. This is called the shutdown timer. Its work is carried out in interaction with the time and date settings. When the appointed time and day arrives, the extension completely shuts down the PC. At the same time, all unclosed files and applications slowly save their progress and only upon completion the computer turns off.
In many cases this is very convenient, although the function itself has not been fully realized. A fairly small number of users use the timer without finding any sense in it or simply not understanding how it can be done.
What is a computer shutdown timer for?
The purpose of the shutdown timer is to shut down the processor at a predetermined time. This allows you to stop power supply and heating of processor elements during inactive times. In turn, this is very economical both financially and technically. A computer needs rest no less than a person, since every element of the processor mechanism wears out and every hour of its useless operation harms the PC.
Also, a timer can be useful for completing work when an important process is running on the computer and interrupting it at the moment can harm the process, and unforeseen circumstances require an urgent move.
In addition, a timer can provide a peaceful rest. For example, by setting a large file to download at night and setting a timer, you can easily go to bed knowing that the lights and processor noise will not disturb the user more than necessary. And, if necessary, you can schedule a system restart to activate installed applications or for changes to take effect.
Sometimes there is a need for a planned PC shutdown without direct user action. This situation applies if the user left the computer to perform a task for a certain time, after which the work needs to be completed automatically. The material will show you how to set a computer shutdown timer in Windows 10 in a variety of ways.
Setting the computer shutdown timer manually using the Shutdown command
The auto-shutdown design, in general, has the form: shutdown -s -t XXX, where s is a parameter indicating the procedure for shutting down the PC, and t XXX is a second-by-second timer, after which the parameter s will be executed. Shudown has other attributes, a list of which is available using the shutdown /? command. in cmd.
There are 3 methods to run the auto shutdown command. Follow these steps.
1. Hold down , then press R. In the “Run” window, enter the following structure: shutdown -s -t 3600, click OK, which will mark an automatic shutdown after 1 hour. 
2. . Type the command shutdown -s -t 7200, then click Enter. 
3. In PowerShell, auto shutdown works on the same principle as in cmd. Call PowerShell by right-clicking on the “Start” button and selecting the appropriate item. Next, enter the command you already know and click Enter. 
As a result of using one of the methods above, you will see a notification about turning off the computer after a specified time. If you need to cancel a given timer, then according to method 1, 2 or 3, use the shutdown -a construct, where the a parameter means cancel the operation. 
Automatic shutdown of the computer through the task scheduler
The task scheduler utility is used in the OS to start and stop tasks according to a schedule. Using it, you can set the shutdown timer for Windows 10. Follow these steps.
In the Run window (Win + R), write control schedtasks, then click OK. 
In the right menu of the task scheduler, click “Create a simple task”. 
Enter a name for the task, such as PC Shutdown Timer, then click Next. 
Select "One Time". Click on “Next”. 
Come up with time indicators for starting the procedure. Click Next. 
Leave "Run a program". Click “Next” again. 
Click Browse and in the System32 directory, find and select shutdown.exe. Next, click “Open.” 
Add the –s parameter as in the screenshot. Click “Next”. 
In the next window, click “Done”. 
If you need to delete the created timer, then go to the task scheduler library, find your task, usually it is in the last place. Right-click on it, click “Delete” in the menu, then “Yes” to confirm. 
Creating a shortcut and BAT file for automatic shutdown
If you need to auto-shut down your Windows 10 computer constantly, for convenience you can create a shortcut or BAT file. To use the shortcut, follow these steps:
Right-click on any free area of the desktop, point to “Create”, selecting “Shortcut”. In the object location, enter a familiar command, such as shutdown -s -t 5400, and click Next. 
Give the shortcut a name. Click “Done”. 
In the properties of the shortcut, which open by right-clicking and selecting the appropriate item, it is possible to change the timer time and set hotkeys for opening. After making changes, click OK. 
Using the principle described above, you can create a shortcut to cancel the auto shutdown command. Only in the location specify the shutdown –a construction and your name. 
A BAT file will help with turning off the PC using a timer in Windows 10. Click on a free area of the desktop. Point the menu to “Create” and select “Text Document”. 
Give it a name, such as sleep timer. Double-click LMB to open it. Copy these lines:
echo off
cls
set /p vrem="Vvod kolichestva secund: "
shutdown -s -t %vrem%
Save your changes. Close the file. 
Change the extension from txt to bat. If the extension is not available, open File Explorer. In the “View” tab, make sure that the “Show extension” checkbox is checked. 
Double-click to enable the batch file. Type the value in seconds and press Enter to set the Windows 10 shutdown timer. 
Windows sleep timer via programs
There are many programs that organize Windows 10 to auto-shut down after a certain time. Such software includes:
- Windows Shutdown Assistant;
- Wise Auto Shutdown;
- Simple Shutdown Timer;
- Windows Reboot;
- KShutdown;
- AMP WinOFF;
- Other.
Let's consider setting a shutdown timer through the Wise Auto Shutdown application. Download it from: wisecleaner.com/wise-auto-shutdown.html and install it. Launch the Wise Auto Shutdown shortcut. The program has a Russian interface. So that it turns on when Windows 10 boots and is always at hand in the tray, check the launch at boot option in the menu. 
In the task selection area, check “Shut down.” We recommend leaving the option to show the notification five minutes before turning off. Then set the time in a way convenient for you. Click on the “Run” button and “Yes”, OK. 
Five minutes before shutdown, the program will show a window with a timer. Here you can agree or cancel the action. 
In addition to shutting down, operations are available with: reboot, sleep, logout, wait. Other programs work on a similar principle.
Now you know how the computer shutdown timer works on Windows 10. Its action can be organized using both standard OS tools and special programs. It's up to you to decide which one to use.
Sooner or later, many users need to automatically turn off their PC. This may be due, for example, to nightly downloads of movies, games or other files. It’s no secret that some operators have night traffic that is much cheaper than day traffic.
A large number of users have already switched to Windows 10, so today we will look at the Windows 10 shutdown timer.
There are many ways to take advantage of such a simple function. Among them there are both third-party programs for the OS and also system tools.
Method 1 - Run menu
The first and one of the easiest ways to set a computer shutdown timer on Windows 10 is to use the Run utility. To launch it, use the key combination “win” and “R”. After it is launched, you need to enter the following command in it:
N - means the number of seconds after which the computer will turn off. For example, we need the PC to turn off after 15 minutes. 15*6=900. So our line will look like this:
After we click OK, we will be shown a corresponding message.
Now after 15 minutes, our PC will shut down. At the same time, we will be offered to save all open documents and so on. Everything is the same as during a normal shutdown. If we need programs to be closed forcibly, then we add -f to our line. It looks like this:
Now Win will stop all applications and turn off the computer.
In case we change our minds about turning off the system, there is a way to disable the Windows 10 shutdown timer. To do this, you need to open “Run” again and enter the following line:
We will be informed that the shutdown has been cancelled.
This method may not be very convenient, so you can use another option. We will create a “shortcut” on the desktop that will activate the PC shutdown timer.
Method 2 - shutdown via shortcut
You need to create a shortcut on your desktop
In the window that appears, enter the parameter we need to turn off the PC, again select 15 minutes
After this we will need to come up with a name for our shortcut
By clicking on the “Done” button, a new shortcut will appear that will activate the shutdown of the computer.
Method 3 - task scheduler
Another simple way to set a shutdown timer on Windows 10 is to use the task scheduler.
To access this service, let’s use the “Run” menu again.
A window will open in front of us in which we will need to select the item “Create a simple task”
Then, we will be asked to enter a name for the task
Now we indicate the frequency with which the task will be executed
Now we set the task execution time
Now you need to select the action to be performed
In the last window you will need to enter the shutdown command, the argument will be -s
Now the task scheduler will launch the specified program and turn off the PC at the appointed time.
So, we have looked at simple ways to set a shutdown timer on Windows 10. With the help of such tools, we can make sure that the computer does not work more than expected and remains turned off when we are not using it.
Of course, there are many third-party applications that perform similar functions, but they will be quite easy to understand, since most of them have a convenient and intuitive interface.
